AutoSim Pro Master Kit

Item number: 7190

Category: Sensor Simulator

389,00 €

including 19% VAT. , plus shipping

 Product cheaper elsewhere?
Available now!

Shipping time: 3 - 5 workdays

 Product cheaper elsewhere?

If you found our product cheaper elswhere, contact us and we'll try to beat our competitor's advertised price!

>> Go directly to the contact form

Since its release in 2012, the AutoSim sensor simulator has proven extremely popular with both technicians and professional diagnosticians thanks to its user-friendly interface, as well as being simple and reliable to operate.

Eight years after the release of the original model, Ditex presents the second generation AutoSim Pro. Distinguished by its completely updated design and significant functional improvements, the AutoSim Pro Automotive Sensor Simulator from Ditex is a very useful tool suitable for application in both cars and trucks in a variety of working situations. This advanced sensor simulator creates an electrically equivalent system to simulate the sensors and actuators found on an actual vehicle.

The Master kit includes the most frequently used additional accessories for the already popular AutoSim Pro Automotive Sensor Simulator from Ditex.

  • Standalone handheld device
  • Intuitive operation via function keys
  • Ultra-fast boot time
  • Excellent industrial design
  • Operates on both 12- and 24-Volt electrical systems
  • Illuminated 2.4" TFT LCD 320?240 display for optimum visibility
  • Protection against reverse polarity connection
  • Low distortion factor and high signal-to-noise ratio for brilliant signals
  • Adjustable frequency range from 0.1 Hz to 20 kHz
  • Generating variable power PWM signals up to 4 A
  • One-wire hook-up PWM output
  • Precise DC voltage source
  • Internal Micro SD card for firmware updates
  • Simulates actual working condition of most automotive sensors
  • Efficient fault elimination without replacing parts "on suspicion"
  • Simulates O2 sensor signals: Zirconia and Titania
  • Checking of basic ECU operation
  • Controlling the output signal allows to check the ECU response and operation
  • Can drive ECU into “open” or “closed” loop
  • Activation of a large number of actuators
  • Variable adjustable voltage output from 0 to ±12 volts
  • Simulates crank and cam sensors inductive and hall
  • In both crank and cam modes you are able to adjust the number of teeth and the missing teeth

AutoSim Pro General Specifications

Sampling rate

200 KSa/s

Settling Time

4.5 µs


12 bit

Maximum output frequency

20 kHz

Output channels


Signal output


Power output


Simultaneous operation of both outputs


Standard operating modes

Waveforms, DC, Pulse

Built-in automotive presets


High current PWM control


DC Power supply

12V, 24V DC (vehicle battery)




TFT LCD Module


2.4" diagonal


320 x 240 pixels


4chip white LED in Parallel

High Brightness

150 cd/m2

Included Memory Card
4 GB micro SDHC




Signal output specification:

Output polarity

Positive and Negative

Output amplitude

±10 mV ~ ±12 V (10 mV step)

DC voltage output range

±10 mV ~ ±12 V (10 mV step)

Output current

± 30 mA maximum

Vertical resolution

12 bits


Sine, Square, Triangular, Ramp

Sine wave frequency range

0.1 Hz ~ 5 kHz

Ramp/Triangular frequency range

0.1 Hz ~ 5 kHz

Square wave frequency range

0.1 Hz ~ 20 kHz

Square wave duty cycle range, 20 kHz

20% ~ 80 %, step 0.1%

Square wave duty cycle range, 10 kHz

10% ~ 90 %, step 0.1%

Square wave duty cycle range, up to 5 kHz

5% ~ 95 %, step 0.1%


1 ~ 100

Pulse width

1 ms ~ 1 sec

Pulse period

2 ms ~ 5 sec


Power output specification:

Output polarity



12 V

Max. output current

4 A continuous

Active level

"switched earth"

Output frequency range

up to 2 kHz

PWM duty cycle range

1% ~ 100%

Duty cycle setting accuracy


Thermal shutdown


Over voltage protection


Current limitation


Short circuit protection




Power supply range

10V DC to 28V DC

Power connector

Pluggable Terminal Block 5.0mm, 2 POS

Quiescent power current


Ambient temperature

0°C ~ +35°C

Ambient humidity

0%RH ~ 85%RH


160 mm x 94 mm x 25 mm



  • Plastic Storage Box with Foam;
  • AutoSim Pro basic kit;
  • Insulated crocodile clip, Pack of 2 (Red, Black);
  • Back-pinning Probe Set (5 needles);
  • Crocodile Clip, 4 mm, 25 A, Red;
  • Crocodile Clip, 4 mm, 25 A, Black;
  • Crocodile Clip, 4 mm, 15 A, Blue;
  • Pluggable Terminal Block (2-Pin, 5mm);
  • SD card to Micro sd card Adapter.

Average product review

Write your first review and help others with their purchase decision:

Question on item

With Click & Collect you can simply order a stocked article (excluding upgrades) in our online shop, pay online and collect it (almost completely) contact-free at your preferred date between 9 a.m. and 1 p.m.