The perfect assistant for electrival circuit testing!
The handy RelaySim Pro allows easy access to test the automotive electrical circuit using a relay socket and fuse. It eliminates relay control circuits and provides manual control of the relay circuit.
It is compatible with the standard terminal 4 and 5 relay circuits and can be used on most car brands and models. The RelaySim Pro can energize any relay that powers DC electric motors (fuel pumps, cooling fans, blower motors, window motors, and any other motor actuated by a relay), headlights, and other car lighting applications or almost all electrical actuators (electromagnetic, electromechanical, electrohydraulic).
Additionally, it can be used in place of a fuse with most other circuits rated 25A or less. The compatibility with both 12V and 24V systems does not limit the operating current range, both voltages support a maximum surge of 27A. The maximum operating range for continuous usage is 21A. The two LEDs on terminal 85 and 86 indicate the voltage, polarity and continuity in the relay coil circuit.
RelaySim Pro has a built-in, dual, digital, high definition, LCD display that allows you to observe the current and voltage values in the tested circuit. The device measures the current flowing through the 87 or 87a circuit, depending on which one is currently activated. It also measures and displays the voltage for the circuits 85, 86, 87, 87a, and 30. You can directly observe the amperage and voltage going into an activated circuit, allowing you to assess the load's health. If an actuator is drawing more current than specified, or the current load is inconsistent during operation, the load/actuator should be replaced.
RelaySim Pro, manufactured by DITEX, provides a wide range of embedded protective functions to protect the tool and the relay circuits under test.
- Fitting for 12V and 24V applications
- Separate control of relay circuit 87 and 87a
- Integrated dual, high-definition, LCD, digital display
- Built-in DC amperometer 0 - 50A
- Up to 21 amp operating current (for 12V and 24V applications)
- Measurement of the current through the activated circuit
- Built-in DC voltage meter 0 - 199.9V
- Independent voltage measurement on each relay terminal
- Open load detection in OFF-state
- Flags a fail event (Status LED)
- Power supply operation range: 10V - 30V DC from a car battery
- 2 independant output channels
- Number of simultaneously activated outputs: 1 (87 or 87A)
- Output supply current (nominal): 21A (min. 6 minutes) in each channel
- Output supply current (surge): 27A in each channel
- Output short circuit current limitation: 65A in each channel
- Relay coil terminal 85/86 polarity status: green and red LED
- Dual, digital LCD display for voltage/current
- Built-in voltage meter measurement range: 0 - 199,9 DC
- Built-in current meter measurement range: 0 - 50 A DC
- Embedded protective functions:
- Short circuit protection
- Current limitation
- Overload protection
- Thermal Shutdown
- Overvoltage protection
- Reverse battery protection
- Loss of GND and positive supply voltage protection
- Electrostatic discharge protection
- Built-in fault indicator: red LED indicates faults in each channels
- RelaySim Pro dimensions: 170 x 83 x 36 mm
- Case dimensions: 280 x 230 x 80 mm
- RelaySim Pro weight: 0,4 kg
- Complete set weight: 1,5 kg
- Can be used in place of a relay or fuse and manually activate the circuit
- The universal cable expands the applications with non-standard or custom relay types or fuses
- Power up DC motors, fuel pumps and fan motors with just a flick of a switch
- Allows you to check every relay terminal
- Unplug the relay and simultaneously manually energize the relay circuit and measure voltage/current
- Activate relay circuit 87 and 87A independently
- Check the relay circuit with an LED as the indicator
- RelaySim Pro device
- 1 m cable from 4 mm black, male banana plug to fully isolated, black alligator clip for connecting to the vehicle chassis (GND)
- 4-pin cable ISO Micro
- 4-pin cable ISO Micro 280
- 4-pin cable ISO Mini
- 5-pin cable ISO Micro
- 5-pin cable ISO Micro 280
- 5-pin cable ISO Mini
- 5-pin universal cable for more comfort when working on solid state relais or other relais with unique pin assignments
- Sturdy plastic case
- 2-year warranty from the manufacturer Ditex
Image may vary
Manual:
To download the English user manual please click here.
There are no reviews yet.
