AutoSim is a smart testing device with power-on self-test. It is mainly used to simulate the output signals from automotive sensors: frequency, voltage and O2 sensor signals. The convenience provided by its user-friendly interface and fault tolerant design is quite remarkable.
AutoSim picks up on service problems where the on-board computer’s diagnosis ends. The sensors only tell the on-board computer that something is wrong. With the AutoSim however, you can determine if the flawed operation was caused by a faulty sensor, a defect in the wiring or a problem in the computer itself.
The device is also largely used for wiring tests because the device can simulate the voltages and check live data readings on the scanning tool to confirm the wiring. You can simulate most sensors from ABS to O2 sensors. This eliminates the need to replace non-defective sensors.
- Hand-held sensor simulator / tester
- Works independently or with any scan tool / oscilloscope
- No more unnecessary replacement of non-defective sensors
- Sensor simulation: voltage, frequency, O2 sensor signals
- Trigger output impulse
- Digital LCD display shows actual signal output
- Matrix LCD screen with backlight
- Short circuit protection
- Dirt-repellent buttons
- DC power supply range extended – 8 V to 40 V
- Simulates actual working condition of the most automotive sensors
- Simulates O2 sensor signal
- Checking of basic ECU operation
- Controlling the output signal allows to check the ECU response and operation
- It can drive ECU into “open” or “closed” loop
- Activation of some actuators
|
Voltage simulation range |
0.1 V ~ 12 V |
|
Frequency simulation range |
0.1 Hz ~ 10 KHz |
|
Trigger pulse output |
up to 0.15 amperes maximum |
|
Output amplitude |
0.2 V to 12 V output amplitude can be selected for each mode |
|
Short circuit protection |
± 150 mA |
|
Power |
12 V DC (auto battery) |
|
Power supply range |
9 V DC ~ 40 V DC maximum |
|
Power connector |
2.5 mm DC Plug |
|
Quiescent power current |
≤ 160 mA |
|
Ambient temperature |
-5°C ~ +50°C |
|
Ambient humidity |
0 % RH ~ 85 % RH |
|
Dimensions |
195 mm x 100 mm x 40 mm |
|
Weight |
400g |
